Sponsors
Studios
Forums >> StudioSysAdmins Lists (posts via e-mail only) >> Discuss@StudioSysAdmins.com


Sanity check - LACP on HP 5406zl, 10GbE ports

Posted by:
Peter Smith



Date:
03-06-2013,
04:00:AM

Hi Anyone doing LACP on the HP 8-port 10GBASE-T v2 zl Module (J9546A), in a 5406zl? Any gotchas? HP docs suggest it's fine. I'll not be doing anything fancy (distributed) yet, just doubling up to some workstations and storage. TIA. -- Pete Smith DevOp/System Administrator Realise Studio 12/13 Poland Street, London W1F 8QB T. +44 (0)20 7165 9644 realisestudio.com To unsubscribe from the list send a blank e-mail to mailto:studiosysadmins-discuss-request@studiosysadmins.com?subject=unsubscribe

Re: Sanity check - LACP on HP 5406zl, 10GbE ports

Posted by:
Greg Whynott



Date:
03-06-2013,
10:15:AM
I've used the procurve line quite a bit,  the LACP on the modules for the zl's work fine,  i had aggergates to various vendors without issue,  cisco,  extreme, and foundry and various OS's and storage vendors.    Not so much a problem for the v2 modules but the v1's over subscribed the ports on the modules.  you could only introduce 24.4 gigs of data onto the back plane from the 4 10 gig ports.   That isn't the case in the v2's,  but i'm not sure for the 8 port modules,  I've not used those yet.  I recall someone saying its all one to one,  but that was before the introduction of the 8 port options.

-g




On Wed, Mar 6, 2013 at 3:58 AM, Pete Smith <pete@realisestudio.com> wrote:
Hi

Anyone doing LACP on the HP 8-port 10GBASE-T v2 zl Module (J9546A), in
a 5406zl? Any gotchas?

HP docs suggest it's fine. I'll not be doing anything fancy
(distributed) yet, just doubling up to some workstations and storage.

TIA.

--
Pete Smith
DevOp/System Administrator
Realise Studio
12/13 Poland Street, London W1F 8QB
T. +44 (0)20 7165 9644

realisestudio.com
To unsubscribe from the list send a blank e-mail to mailto:studiosysadmins-discuss-request@studiosysadmins.com?subject=unsubscribe
Re: Sanity check - LACP on HP 5406zl, 10GbE ports

Posted by:
Eppie Tong



Date:
03-06-2013,
15:10:PM
It works fine for us. We have 2 of the 5412z.

Just make sure you do not have it connected while you are doing the configuration.

Eppie

Sent from my iPhone

On Mar 6, 2013, at 10:12 AM, greg whynott <greg.whynott@gmail.com> wrote:

I've used the procurve line quite a bit,  the LACP on the modules for the zl's work fine,  i had aggergates to various vendors without issue,  cisco,  extreme, and foundry and various OS's and storage vendors.    Not so much a problem for the v2 modules but the v1's over subscribed the ports on the modules.  you could only introduce 24.4 gigs of data onto the back plane from the 4 10 gig ports.   That isn't the case in the v2's,  but i'm not sure for the 8 port modules,  I've not used those yet.  I recall someone saying its all one to one,  but that was before the introduction of the 8 port options.

-g




On Wed, Mar 6, 2013 at 3:58 AM, Pete Smith <pete@realisestudio.com> wrote:
Hi

Anyone doing LACP on the HP 8-port 10GBASE-T v2 zl Module (J9546A), in
a 5406zl? Any gotchas?

HP docs suggest it's fine. I'll not be doing anything fancy
(distributed) yet, just doubling up to some workstations and storage.

TIA.

--
Pete Smith
DevOp/System Administrator
Realise Studio
12/13 Poland Street, London W1F 8QB
T. +44 (0)20 7165 9644

realisestudio.com
To unsubscribe from the list send a blank e-mail to mailto:studiosysadmins-discuss-request@studiosysadmins.com?subject=unsubscribe

To unsubscribe from the list send a blank e-mail to mailto:studiosysadmins-discuss-request@studiosysadmins.com?subject=unsubscribe
Re: Sanity check - LACP on HP 5406zl, 10GbE ports

Posted by:
Greg Whynott



Date:
03-06-2013,
17:00:PM
Connected should be ok.  You might not want the end point enabled/ configured tho.  At least this hasn't been an issue for me thus far. 

G

Sent while driving. 

On 2013-03-06, at 15:08, Eppie Tong <eppiet@rogers.com> wrote:

It works fine for us. We have 2 of the 5412z.

Just make sure you do not have it connected while you are doing the configuration.

Eppie

Sent from my iPhone

On Mar 6, 2013, at 10:12 AM, greg whynott <greg.whynott@gmail.com> wrote:

I've used the procurve line quite a bit,  the LACP on the modules for the zl's work fine,  i had aggergates to various vendors without issue,  cisco,  extreme, and foundry and various OS's and storage vendors.    Not so much a problem for the v2 modules but the v1's over subscribed the ports on the modules.  you could only introduce 24.4 gigs of data onto the back plane from the 4 10 gig ports.   That isn't the case in the v2's,  but i'm not sure for the 8 port modules,  I've not used those yet.  I recall someone saying its all one to one,  but that was before the introduction of the 8 port options.

-g




On Wed, Mar 6, 2013 at 3:58 AM, Pete Smith <pete@realisestudio.com> wrote:
Hi

Anyone doing LACP on the HP 8-port 10GBASE-T v2 zl Module (J9546A), in
a 5406zl? Any gotchas?

HP docs suggest it's fine. I'll not be doing anything fancy
(distributed) yet, just doubling up to some workstations and storage.

TIA.

--
Pete Smith
DevOp/System Administrator
Realise Studio
12/13 Poland Street, London W1F 8QB
T. +44 (0)20 7165 9644

realisestudio.com
To unsubscribe from the list send a blank e-mail to mailto:studiosysadmins-discuss-request@studiosysadmins.com?subject=unsubscribe

To unsubscribe from the list send a blank e-mail to mailto:studiosysadmins-discuss-request@studiosysadmins.com?subject=unsubscribe
To unsubscribe from the list send a blank e-mail to mailto:studiosysadmins-discuss-request@studiosysadmins.com?subject=unsubscribe
Re: Sanity check - LACP on HP 5406zl, 10GbE ports

Posted by:
Anonymous



Date:
03-07-2013,
09:00:AM
Shawn is that different for C4D R14? 

Ryan


Ryan Lynch 
head of operations

PLEASE NOTE OUR NEW TEMPORARY ADDRESS:
imaginaryforces | 121 west lexington dr., building 413 | glendale | p 323.957.6868 | f 323.957.9577 | www.imaginaryforces.com



From: Eppie Tong <eppiet@rogers.com>
Reply-To: "discuss@studiosysadmins.com" <discuss@studiosysadmins.com>
Date: Wednesday, March 6, 2013 12:08 PM
To: "discuss@studiosysadmins.com" <discuss@studiosysadmins.com>
Subject: Re: [SSA-Discuss] Sanity check - LACP on HP 5406zl, 10GbE ports

It works fine for us. We have 2 of the 5412z.

Just make sure you do not have it connected while you are doing the configuration.

Eppie

Sent from my iPhone

On Mar 6, 2013, at 10:12 AM, greg whynott <greg.whynott@gmail.com> wrote:

I've used the procurve line quite a bit,  the LACP on the modules for the zl's work fine,  i had aggergates to various vendors without issue,  cisco,  extreme, and foundry and various OS's and storage vendors.    Not so much a problem for the v2 modules but the v1's over subscribed the ports on the modules.  you could only introduce 24.4 gigs of data onto the back plane from the 4 10 gig ports.   That isn't the case in the v2's,  but i'm not sure for the 8 port modules,  I've not used those yet.  I recall someone saying its all one to one,  but that was before the introduction of the 8 port options.

-g




On Wed, Mar 6, 2013 at 3:58 AM, Pete Smith <pete@realisestudio.com> wrote:
Hi

Anyone doing LACP on the HP 8-port 10GBASE-T v2 zl Module (J9546A), in
a 5406zl? Any gotchas?

HP docs suggest it's fine. I'll not be doing anything fancy
(distributed) yet, just doubling up to some workstations and storage.

TIA.

--
Pete Smith
DevOp/System Administrator
Realise Studio
12/13 Poland Street, London W1F 8QB
T. +44 (0)20 7165 9644

realisestudio.com
To unsubscribe from the list send a blank e-mail to mailto:studiosysadmins-discuss-request@studiosysadmins.com?subject=unsubscribe



This e-mail is intended only for the named person or entity to which it is addressed and contains valuable business information that is proprietary, privileged, confidential and/or otherwise protected from disclosure. If you received this e-mail in error, any review, use, dissemination, distribution or copying of this e-mail is strictly prohibited. Please notify us immediately of the error via e-mail to <ifpostmaster> postmaster@imaginaryforces.com and please delete the e-mail from your system, retaining no copies in any media. We appreciate your cooperation.

  ­­  

Product Finder
Gallery