Sponsors
Sponsor Products
Multihost teradici over WAN?
posted by Arturo Camacho  on April 13, 2018, 2:25 p.m. (5 months, 12 days ago)
3 Responses     0 Plus One's     2 Comments  

We've been able to set up one remote zero client to connect to our router and set up forwarding of ports for this to work correctly to one of the machines in our LAN. 

Now there's the need to set up a second machine like this. Is there an option to change the default port the Teradici card/zero client uses?

If there isn't, i've tried setting up a VPN link, and that works, but it's super laggy due to latency, any recommended piece of hardware that might to a better job?

Thanks in advance.


Thread Tags:
  vpn, wan teradici, latency, 

Response from Arturo Camacho @ April 18, 2018, 12:44 p.m.

We ended up getting this one: https://www.asus.com/ca-en/Networking/RT-AC86U/

It reduced the roundtrip latency to around 52 ms, so it's workable, and the plus side is that it's available at your local Best Buy.

It would be interesting to test and see how it compares to what you are using in similar conditions. 


0 Plus One's     0 Comments  
   

Response from Anonymous @ April 16, 2018, 3:25 a.m.
Hi Arturo

We mostly give remote zero clients a hardware "vpn bridge" based on one of these little badgers:

http://www.pcengines.ch/apu2.htm

Linux, OpenVPN on top ...

What's your user's latency? Ours are mostly <20ms, but sometimes more.

On 13 April 2018 at 19:25, Arturo Camacho <content@studiosysadmins.com> wrote:

We've been able to set up one remote zero client to connect to our router and set up forwarding of ports for this to work correctly to one of the machines in our LAN.

Now there's the need to set up a second machine like this. Is there an option to change the default port the Teradici card/zero client uses?

If there isn't, i've tried setting up a VPN link, and that works, but it's super laggy due to latency, any recommended piece of hardware that might to a better job?

Thanks in advance.


To unsubscribe from the list send a blank e-mail to mailto:studiosysadmins-discuss-request@studiosysadmins.com?subject=unsubscribe



--
Framestore Peter Smith Senior Systems Engineer
London New York Los Angeles Chicago Montral
T+44 (0)20 7208 2600 M+44 (0)7816 123009
28 Chancery Lane, London WC2A 1LB
Twitter Facebook framestore.com



0 Plus One's     2 Comments  
   

Response from Anonymous @ April 16, 2018, 3:25 a.m.
bridge^Wrouter

pre-caffeine!

On 16 April 2018 at 08:19, Peter Smith <peter.smith@framestore.com> wrote:
Hi Arturo

We mostly give remote zero clients a hardware "vpn bridge" based on one of these little badgers:

http://www.pcengines.ch/apu2.htm

Linux, OpenVPN on top ...

What's your user's latency? Ours are mostly <20ms, but sometimes more.

On 13 April 2018 at 19:25, Arturo Camacho <content@studiosysadmins.com> wrote:

We've been able to set up one remote zero client to connect to our router and set up forwarding of ports for this to work correctly to one of the machines in our LAN.

Now there's the need to set up a second machine like this. Is there an option to change the default port the Teradici card/zero client uses?

If there isn't, i've tried setting up a VPN link, and that works, but it's super laggy due to latency, any recommended piece of hardware that might to a better job?

Thanks in advance.


To unsubscribe from the list send a blank e-mail to mailto:studiosysadmins-discuss-request@studiosysadmins.com?subject=unsubscribe



--
Framestore Peter Smith Senior Systems Engineer
London New York Los Angeles Chicago Montral
T+44 (0)20 7208 2600 M+44 (0)7816 123009
28 Chancery Lane, London WC2A 1LB
Twitter Facebook framestore.com





--
Framestore Peter Smith Senior Systems Engineer
London New York Los Angeles Chicago Montral
T+44 (0)20 7208 2600 M+44 (0)7816 123009
28 Chancery Lane, London WC2A 1LB
Twitter Facebook framestore.com



0 Plus One's     0 Comments